A business line of credit costs more than its interest rate. Most lines add a handful of fees: one when the line is opened, sometimes one each time you draw, a charge for keeping the line open, and penalties for paying late. Each one is charged at a different moment, so the cheapest-looking rate is not always the cheapest line. The way to compare offers is to list every fee, work out what you would pay on the amount you will actually borrow, and add it to the interest. This guide shows you how, with worked numbers for owners of contracting, retail, restaurant, trade and manufacturing businesses.
If you want a line with a published starting price to measure against, our business line of credit starts at 1.2% per month, and our team can walk you through the full cost of an offer before you accept it.
TL;DR
- Business line of credit fees fall into four groups: up-front (origination, application), usage (draw fees), holding (annual or monthly maintenance, inactivity) and penalty (late or returned payment).
- A draw fee is a percentage or flat charge applied each time you take money from the line, so it grows with how often you borrow.
- Interest is only one part of the cost. Add every fee to the interest you expect to pay on the amount you will really use, then compare offers on that total.
- SBA-backed lenders work under federal fee rules: no prepayment fee, and a cap on late fees. Other lenders set their own terms, so read the fee schedule line by line.
- A fee quoted as a percentage of the credit limit costs more per dollar borrowed when you use only part of the line.
Table of Contents
- The fees a business line of credit can carry
- What federal rules say about fees on SBA-backed lines
- How fees add to interest: a worked example
- Is a 10% origination fee high?
- Which fees you can avoid, reduce or check
- Interest rate versus fees: what is the difference?
- Fees by industry: what to watch
- Where we fit
- Our perspective
- FAQ
- Sources
The fees a business line of credit can carry
A line of credit is revolving: you get a limit, draw what you need, repay, and draw again. Lenders earn from interest on the drawn balance, and many add fees to cover underwriting, servicing and the risk of keeping money available. Fee names differ between lenders, but they sort into a few predictable types.
| Fee type | When it is charged | How it is usually expressed |
|---|---|---|
| Application or underwriting fee | When you apply or when the lender reviews your file | Flat dollar amount |
| Origination fee | When the line is approved or opened | Percentage of the credit limit |
| Draw fee | Each time you withdraw funds | Percentage of the amount drawn, or flat |
| Maintenance (annual or monthly) fee | Every year or month the line stays open | Flat dollar amount |
| Inactivity or non-use fee | When you do not draw for a period | Flat or percentage |
| Renewal fee | When the line is renewed at the end of its term | Flat or percentage |
| Late payment fee | When a payment misses its due date | Percentage of the payment or flat |
| Returned payment fee | When an automatic payment fails | Flat dollar amount |
| Closing or termination fee | When you close or pay off the line early | Varies; some lenders charge none |
Not every lender uses every fee. Some charge a single origination fee and nothing else. Others have a low headline rate and several smaller charges. That is why the table above works best as a checklist: put each row next to the offer in front of you and fill in a number or a "none".
Origination and application fees
These are paid once, near the start. An origination fee is normally a percentage of the credit limit, not of what you draw. On a $50,000 line, a 2% origination fee is $1,000 whether you borrow $5,000 or $50,000. Some lenders deduct it from the first draw; others bill it separately. Either way, it reduces the money that reaches your account or adds to what you owe.
This matters for businesses with seasonal or lumpy needs, such as a landscaper who draws heavily in spring or a retailer stocking up before the holidays. If you will use only a fraction of the limit, a fee based on the whole limit is spread over less borrowing.
Draw fees
A draw fee, sometimes called a withdrawal or transaction fee, is charged each time you pull money from the line. It is usually a percentage of the amount drawn. Suppose a line carries a 1.5% draw fee and you draw $10,000 to cover materials for a job. The fee is $150, charged immediately, before any interest accrues.
Draw fees reward planning. Three draws of $10,000 cost three fees; one draw of $30,000 costs one. But a larger draw also means more interest-bearing balance, so the right pattern depends on your cash flow, not only on the fee. If your line has a draw fee, work out the cost for the number of draws you expect in a year.
Maintenance, inactivity and renewal fees
These cover the cost of keeping the line open. A flat annual fee is easy to price: divide it by what you borrow in a year to see its effect. For example, a $250 annual fee on a business that averages $20,000 drawn adds about 1.25 percentage points to the yearly cost, on top of interest. An inactivity fee is worth noting if you keep a line mainly as a safety net, because you may pay for access even in months when you borrow nothing.
Late and returned-payment fees
These are penalties, and the easiest to avoid. Setting the repayment date a few days after your customers usually pay you, and keeping a buffer in the account that funds automatic payments, keeps them off your statement.
What federal rules say about fees on SBA-backed lines
If the line is backed by the U.S. Small Business Administration, the fees are not entirely up to the lender. The SBA's lender regulation, 13 CFR § 120.221, sets several limits that are useful for any owner to know:
- Lenders may charge reasonable packaging and servicing fees that are customary for similar lenders in the area.
- They may collect necessary out-of-pocket costs such as filing or recording fees.
- A late payment fee may not exceed 5 percent of the regular loan payment.
- A lender may not charge a fee for full or partial prepayment.
The same regulation set (§ 120.222) bars commitment, bonus, broker, commission and referral fees, along with points and add-on interest. Those are the kinds of charges that can quietly inflate a loan's cost, so the rule is a helpful benchmark when you read any offer.
For the SBA's Working Capital Pilot, which supports revolving lines for small businesses, the agency's July 15, 2024 Federal Register notice states that lenders and agents may collect fees from borrowers, that those fees are capped under 13 CFR 120.221 and SBA's lending procedures (SOP 50 10), and that extraordinary servicing fees are capped at 2 percent per year on the outstanding balance of the part of the loan that needs special servicing.
The regulation text cited above is the 2012 edition, and rules are updated over time, so confirm the current wording on the SBA's own site when you are ready to borrow. For the cost side of SBA loans in particular, see our explainer on the SBA guarantee fee on a 7(a) loan and our breakdown of business loan closing costs.
How fees add to interest: a worked example
The honest way to price a line of credit is to total everything you would pay over a year, then divide by the average amount you borrowed. Here is an illustration with made-up round numbers, not a quote from any lender.
The situation: A plumbing contractor has a $50,000 line. Over twelve months the contractor draws $10,000 four times, repays each draw after about 90 days, and so carries an average balance near $10,000.
Offer A: low rate, several fees
- Interest: 12% a year on the average $10,000 balance = $1,200
- Origination fee: 2% of the $50,000 limit = $1,000
- Draw fee: 1.5% on four draws of $10,000 = $600
- Annual maintenance fee = $250
- Total cost: $3,050, which is 30.5% of the average amount borrowed
Offer B: higher rate, no up-front or draw fees
- Interest: 18% a year on the average $10,000 balance = $1,800
- No origination, draw or maintenance fee
- Total cost: $1,800, which is 18% of the average amount borrowed
Offer A looks cheaper on its rate and is the more expensive one in this pattern of use. If the same contractor borrowed $50,000 and kept it all year, the picture would shift, because the fixed fees would be spread over a much larger balance. The lesson is that the right offer depends on how you will use the line. Before you compare, write down your expected number of draws, the average balance and how long each draw stays outstanding.
Reading rates that are quoted monthly
Some business financing is priced per month rather than per year. A rate of 1.2% per month is not 1.2% a year. On a $25,000 balance, one month of interest at 1.2% is $300. The pricing we publish for our business line of credit starts at 1.2% per month, so the same arithmetic applies: multiply the balance you carry by the monthly rate, and add any fees on top. If a lender quotes a monthly or per-draw factor, convert it to a total in dollars for your own balance and timing before comparing it with an annual rate.
For more on how rates are set and what small businesses pay, read our guide to business line of credit rates. If you want to see how interest-only payments look on a drawn balance, our walk-through of an interest-only business line of credit uses a $25,000 draw.
Is a 10% origination fee high?
Owners often ask this, and the answer depends on what the fee buys and how long you borrow. A 10% fee on a $50,000 line is $5,000 charged against the limit. That is a large cost if you draw a small part of the line or repay within a few months, because the fee is fixed and the benefit is brief. It is easier to absorb if you plan to use most of the limit for a long time.
To judge it, do three things:
- Convert the fee to dollars based on the limit, not the amount you plan to draw.
- Divide by the borrowing you expect over the line's term to get the fee as a percentage of real use.
- Add it to the interest and compare that total with at least one alternative structure, such as a line with a lower fee and a higher rate.
Also check whether the fee is charged on the whole limit or only on drawn money, and whether it is refunded or reduced if you close the line early. Those details change the true cost more than the headline percentage.
An origination fee is also not the only cost to compare. Where the fee is modest and the rate is the main cost, the rate carries the comparison. Where the rate is attractive and the fees are layered, the fees do.
Which fees you can avoid, reduce or check
Not every fee is fixed. A few ways to keep costs down:
- Choose the structure that fits your draw pattern. Frequent small draws favor a line with no draw fee. A few large draws can suit a line that charges per draw but has a low rate.
- Size the limit to your need. If the origination or maintenance fee is tied to the credit limit, a limit far above your real needs costs you more.
- Match the repayment schedule to your income. A restaurant with steady daily deposits and a contractor paid on milestone billing need different payment timing. Avoiding late fees starts with a due date that follows your cash.
- Ask what happens at renewal. Find out whether the line renews automatically, whether a renewal fee applies, and whether the rate can change.
- Check prepayment terms. On SBA-backed loans, federal rules bar a prepayment fee. For other products, read the contract for any early-payoff charge. Our article on the SBA prepayment penalty explains how the rules apply to larger SBA loans.
- Get the fee schedule on paper. Before you sign, find the fee table in the agreement, not only in marketing material.
A checklist to run on any offer
Copy this list and fill it in for each line you are considering:
- Credit limit and term length
- Interest rate, whether fixed or variable, and how it is quoted (annual, monthly or a factor)
- Application or underwriting fee
- Origination fee, and whether it applies to the limit or the draw
- Draw fee, and whether it is a percentage or flat
- Maintenance or inactivity fee
- Renewal fee
- Late and returned-payment fees
- Prepayment or closing charge
- Total dollar cost on your expected draws over twelve months
The last line is the one that decides. If a lender can help you fill in every row clearly, you are working with someone who wants you to understand the price.
Interest rate versus fees: what is the difference?
Interest is the charge for the money you have outstanding. It accrues daily or monthly on the drawn balance and stops growing when you repay. Fees are charges for services or access, and they follow their own timing: once at opening, at each draw, or every year. Because the two behave differently, a single "rate" cannot capture the full cost.

That is also why a published average rate does not tell you what you will pay. Business line of credit pricing varies by lender type, credit profile, collateral, time in business and revenue. Averages are a starting point for what is plausible. Your own offer, with its fees, is the number that counts. Figures that move, such as the prime rate and average lending rates, are updated regularly, so look at the lender's written quote and the Federal Reserve's current releases instead of relying on any number you read months ago.
If you are comparing a line with other kinds of financing, our overview of the different types of small business loans shows how a line sits next to term loans, equipment financing and working capital loans.
Fees by industry: what to watch
The fee that hurts most depends on how your business moves money.
- Contractors, electricians, plumbers and HVAC companies: You often buy materials before a client pays. Draws are frequent and repayment follows invoices, so a per-draw fee adds up. A line without draw fees, or with a few larger draws timed to jobs, usually fits better.
- Retail and flower shops: Inventory peaks before holidays. A line used heavily for a few months and barely at all the rest of the year makes inactivity and maintenance fees worth checking.
- Restaurants: Cash flow is daily and repayments can be frequent. Look at late and returned-payment fees and how the repayment schedule matches your deposits.
- Manufacturers and hardware businesses: Larger purchase orders mean bigger draws. Origination fees on the full limit and renewal terms matter more than small flat charges.
- Insurance agencies and real estate businesses: Income can arrive in commissions at uneven times. A flexible repayment schedule and no early-payoff charge protect you when a large commission lands.
Where we fit
When banks or credit unions turn a business down, or take longer than a project allows, a line from us gives owners a revolving source of working capital. We offer lines of credit up to $250,000, with pricing that starts at 1.2% per month, and we work with owners across hundreds of industries. Our funding can come as soon as 24 hours. If a line is not the right shape, our funding solutions also include working capital loans, equipment financing and term loans, so you can match the product to the job.

If you want the full cost of a line laid out in dollars for your own draw pattern, apply through Capital for Business and talk it through with our team.
Our perspective
Since 2009 we have worked with owners who needed money to move faster than a bank could. What we hear most often is not "what is the rate?" but "what will this cost me by the end of the year?" That is the right question.
We believe a line of credit is at its best when it matches how a business actually earns. A contractor who buys materials ahead of a draw payment, a retailer building inventory for the holidays and a restaurant covering a slow month each use credit differently. A line should be priced and structured so that the owner can see the cost before using it.
That is why we encourage owners to do the arithmetic in this article on every offer, ours included: list each fee, apply it to your expected draws and compare the total. Our approach is built around flexible terms, approval for a broad range of credit profiles, and funding that can arrive in as little as 24 hours, so that a good decision does not have to wait for a long approval process.
Capital
FAQ
What is a draw fee on a line of credit?
A draw fee is a charge applied each time you take money from your line. It is usually a percentage of the amount drawn, so a 1.5% fee on a $10,000 draw is $150. Because it is charged per draw, the total depends on how often you borrow.
What fees do business lines of credit usually have?
Common charges include application or underwriting fees, an origination fee on the credit limit, draw fees, annual or monthly maintenance fees, renewal fees and late-payment penalties. Not every lender uses all of them. Check each against your expected use to find the true annual cost.
Are there limits on fees for SBA-backed lines?
Yes. Under 13 CFR § 120.221, SBA lenders may not charge a prepayment fee, and a late fee cannot exceed 5 percent of the regular payment. Confirm the current rule on the SBA's website before you borrow.
How do I compare a line with a monthly rate to one with an annual rate?
Convert both to dollars. Multiply the balance you expect to carry by the monthly rate for each month, or by the annual rate for the year, then add all fees. For example, 1.2% per month on a $25,000 balance is $300 for that month. Compare the totals, not the rates.
Does a line of credit hurt my credit if I do not use it?
An unused line generally does not add debt, but a lender may charge a maintenance or inactivity fee for keeping it open. Check for those charges, and for how the lender reports the account, before you accept the line.
Sources
- 13 CFR § 120.221, SBA lender fees (govinfo.gov, 2012 edition)
- SBA Working Capital Pilot notice, Federal Register, July 15, 2024
